|
|||||
Our 8 Step Carpet Cleaning Program
An iron burn like this can be repaired, making your berber carpet as good as new.
Carpet cleaning before and after
STEP 1: Pre-Inspection
Every great carpet cleaning experience starts with a proper pre-inspection. Our service technician will inspect your particular areas of concern as well as noting carpet construction and soiling conditions. He will also advise you of any possible permanent staining.
STEP 2: Commercial Pre-Vacuum
Your carpet will be thoroughly vacuumed with a special Turbine Vacuum System to remove bonded dry soil. Dry soil is removed by a thorough vacuuming. Removing dry soil is one of the most important steps in cleaning. (Chairs and tables will be carefully moved.) Larger pieces, beds and dressers are left in place under our regular pricing structure. Furniture will be protected with blocks and tabs.)
STEP 3: Pre-Spray & Pre-Spot
Traffic areas and spots are pretreated for more effective soil and spot removal.
STEP 4: Pre-Groom
Your carpet will be pre-groomed with a carpet groomer or rotary cleaning machine (depending on soil level) to further loosen traffic area soil.
STEP 5: Extract & Rinse
Once the soil has been loosened, our state-of-the-art truck-mounted hot water extraction process will thoroughly flush the carpet pile. Pressure and heat are regulated so that carpet is not over-wet. We clean with water temperature between 180 °F - 190 °F. Every carpet that we clean is pH balanced so that there is no sticky residue left behind.
STEP 6: Post-spot Treatment
If any spots are not removed during the cleaning process, specialty spotting techniques are employed. Note: Permanent stains identified by our service technician may not be removed.
STEP 7: Post Grooming
The carpet pile is set in one direction for faster drying and visual appeal.
STEP 8: Post Inspection
Please walk through your home or business to inspect our work. Let us know that you are pleased by signing our service receipt.
Encapsulation Carpet Cleaning With The AT-500
CCS FloorCare Essentials has the industry’s latest technology…The Ultra Low Moisture Carpet Cleaning Machine…Dries within One Hour! This pioneering process uses the Low-Moisture Encapsulation Cleaning Technology.
The Ultra Low Moisture Process
To encapsulate with this new technology, simply use the AT-500 to thoroughly pre-vacuum the area to be cleaned. Then use a power sprayer to apply the Encapsulation Carpet Cleaner onto the carpet. Turn off the vacuum and thoroughly work the Encapsulation Carpet Cleaner into the fibers with the dual counter-rotating brushes of the AT-500. Allow to dry (usually no more than 30 minutes with regular maintenance), then flip your vacuum back on and vacuum the area. That's it. Done. It doesn't get any easier than this!
